Preventing Moisture Build Up in Your Wood Fence

Three things should be taken into account when you have a wood fence, to prevent moisture build-up.

  • the type of wood
  • proper water drainage
  • wood protection

The choice of wood is made by taking into account several criteria: durability, resistance, aspect, price etc. Being a natural material, wood can be damaged by moisture, especially in the areas close to the earth, which commonly get affected by rot. That’s why the best wood for fencing is the type used in construction.fence installationWhen building the fence, there are other things to taken into account too. As we said, the biggest problem is decay. Wood that rots in contact with the soil gets more easily damaged by wind, or falls under its own weight. Therefore, in addition to using a resistant type of wood, responsible Arvada fence company contractors must also ensure water drainage and protection of the buried portion of the fence. Proper drainage is ensured if gravel and sand are put in the holes that you dig for the fence poles. If the gravel is also “bonded” with cement instead of earth, the resistance increases even more.

There are also solutions designed to be applied directly on the wood, ensuring moisture proofing and a long lasting beautiful aspect: lacquers, paints, waxes, oils and other impregnation substances. Just remember to choose products designed for outdoor use.

What are Snow Fences

Residents in mountain areas have always been affected by the risk of snow slides, in the winter. The need to live alongside this continual threat has led to various attempts to reduce it by building complex systems of artificial structures. These artificial structures are necessary because deforestation and the development of tourism in these regions have led to a reduction in natural barriers that stop snow slides. Also, the intense traffic in these regions implies an increase in security requirements, to protect ski resorts, residential areas, roads and railways.

winter fencesSnow fences greatly reduce the risk of snow slides. Snow expert residential fencing Denver contractors design them to stabilize the snow, prevent it from reaching certain areas, and even stop avalanches, where this risk exists.

When installing a snow fence, you have to take into account certain aspects.

  1. Decide on the areas you must protect from snow slides
  2. Study the direction and intensity of the predominant winter winds
  3. Determine the best distance between the snow fence and the area that needs to be protected. A fence installed too closely will only make things worse
  4. Carefully select the height of the fence. As a general rule, a 2.4 meter snow fence will protect an area of ​​up to 74 centimeters annual snow fall.
  5. Consider multiple rows of fences if needed
  6. Dig holes for fence posts deep enough to bury 1/3 of the height of the post; this ensures the resistance of the fence to wind and the weight of the snow.

Preventing Rust on Chain Link Fences

chain link fenceCorrosion and rust are destructive for the aspect and functionality of chain link fences, weakening the metal and making it look dilapidated. The good news is that these are problems that can be avoided through some specific and regular maintenance.
The simplest thing that you should do is keeping your chain link fence clean. Dirt and grime are abrasive and may contain chemical compounds that make the fence vulnerable to rust. Clean your chain link fence in Denver with a soft brush using water and some soap or dish detergent.
If rust and corrosion are already present on some areas of the chain link fence, use fine-grit sandpaper or commercial rust removal products to clean it. This operation must be followed by coating your fence with a rust inhibitor or an outdoor paint that contains rust inhibitors.
Prevention is also a good measure to protect your chain link fence. Make sure to avoid scratching it or any other damage that may expose the bare metal underneath the protective layer. Do not climb the fence, avoid any mechanical shock, do not expose it to moisture by using it to dry rugs and blankets and make sure to prevent tall vegetation from growing on the fence.

Getting Your Fence Ready for Fall in Colorado

fall is the best time to repair fences
Whatever material the fence around your Colorado property is made from, it is a good idea to prepare it for the time when temperatures start dropping and the air becomes more humid, especially if you live in area where the first frosts can come unexpectedly early. Here are a few of the things that you should do:
– Cleaning – removing the dust and dirt that has accumulated on your fence is beneficial for the fence material and for you, too, because the process reveals any sign of damage sustained by the fence and makes repairs easier. Just grab a pressure water and give your fence a good wash;
– Inspection – when the fence is clean, inspect it inch by inch to see whether it needs repair;
– Repair – have Westminster fencing pros repair rotten wood, rusty components, and pay attention to the fasteners and to the locks as well;
– Apply coating or stain – if your fence needs a fresh coat of protective coating, stain or paint, this is the best time to do the job. Use sandpaper or a sanding machine to remove any trace of the old coating or stain and apply the new layer only on clean surfaces.