Fence posts are usually made from strong material, but even these resilient components can break or get damaged if they are exposed to the elements for too long or if they are affected by other forms of impact. A broken fence post will compromise the strength of the entire fence, so it is very important to have a BBB A+ rated residential fencing company in Denver fix the post right away. If you choose to try to do the repair on your own, here are some suggestions:
Wooden posts – wood is sensitive to moisture, to extreme heat or cold and to insect attacks. If you notice any rot, signs of an infestation with pests or cracking, see whether the damaged part can be removed and replaced with some suitable repair material – if the damage is too extensive, you might have to replace the post. To prevent the recurrence of the problem, apply suitable surface treatment on the repaired post or on the replacement post;
Metal posts – the only things that can get to metal are rust and physical impact. If your post develops rust, remove it with some suitable chemical, then apply rust preventive coating; if the post has been bent by strong winds or animals, straighten it and make sure that the base holds the post firmly in place. If necessary, dig a hole around the post and fill it with cement to ensure stability.
If you are a first-time homeowner, you are surely overwhelmed by the amount of work that you need to put into your property. Your fence, whatever style it is and whatever material it is made from, is probably a sturdy construction, but if you want to keep it that way, make sure to include it into your home maintenance checklist. Here are the tasks that you should perform:
- Regular inspections – perform a detailed health check on your fence at least twice a year as well as after strong storms or other extreme weather events and repair whatever fault you find during the inspection; Should your fence require extensive maintenance, look to a top rated Denver fence company for exceptional repair services.
- Regular cleaning – perform a thorough cleaning of the fence every six months. Most fences can be cleaned with a mild detergent and some warm water applied with a sponge or with a power washer. In the final phase, remove the soap water residues;
- Apply protection – fences made from synthetic material are impervious to rot, insects and rust, so they don’t need coating, but wood and metal fences need to be protected from the elements with the right type of surface coating. Always apply the coating on a clean and intact surface, so the cleaning and the repairs should precede the coating process.
Fences play not only the role of protecting your property from intruders – many structures are also intended to contain whatever and whoever is within the premises, including pets. However, pets, especially dogs, can be very inventive when it comes to sneaking out, so the pet fence needs to be very sturdy and designed to meet special challenges. Here are some features that pet fences need to have:
- Identify your pet’s favorite escape method – pets can invent various methods to get out: they can brute-force or chew on the fence, they can dig under it, jump over it or open the latch on the gate;
- Suitable height and thickness – whatever material you choose for your pet-proof fence, make it tall and thick enough to prevent brute-forcing and jumping over;
- Suitable material – it is a good idea to choose a fence material that is hard enough to resist strong teeth. Metal and masonry fences work best on properties where there are pets around;
- Suitable design – if your pet tends to dig under the fence, prevent that by laying concrete under the fence or by making sure there is no gap between the bottom of the fence and the ground, not even a thin gap – pets can start digging if they find even the smallest gap.
Check out https://metrofence.net/ to get an idea of the best fence you can install to keep your pets safe.
Installing a new fence on your property requires careful preparation, especially if it involves the demolition of the old fence to make space for the new one. Here are some of the things that you will need to take care of:
- Establish property limits clearly – take a look at the property drawings and blueprints and make sure that the fence is on your side of the property limits;
- Obtain fence repair Thornton CO permits if you need to – find out whether or not the operations you are proposing require a permit. Consult HOA covenants and local building regulations – they will tell you how to apply for a permit if you need one and what type of fences are allowed in the neighborhood;
- Inform your neighbors about your plans – you are not required by the law to do this, but discussing your plans with your property neighbors will improve your relationship with them;
- Choose your materials and create the design – choose your material and create the design based on your preferences and the fence repair Thornton CO HOA covenants that informs such choices in your neighborhood as well as based on the terrain on your property and the climate area where your property is located;
- Clean the area of the installation – de-weeding the area and loosening the ground where it is too hard are also very important.
Vines can play multiple, beneficial roles when they climb on fences, making the fence not only more attractive, but enhancing its protective qualities and making it more private, too. Unfortunately, vines can also be damaging for the fence – if their growth is not controlled, they can damage the fence. Fortunately, they are easy to keep under control – according to recognized Brighton fence company professionals, here is how to make the vines on your fence safe:
- Choose the right type of vines – certain types of woody vines, such as trumpet vines or wisteria are attractive and have spectacular, fragrant flowers, but they tend to extend their roots too much, damaging fence posts during the process. Invasive species are also dangerous for fences – they tend to acquire the land around, driving out indigenous plant species and damaging built structures on their way, including your fence. The best type of vines to choose for your fence are non-woody species, such as sweet pea, morning glory, nasturtium or moonflower;
- Manage the vines – regularly trimming the vines and inspecting the fencing underneath is essential for making sure that your fence is safe, undamaged by the vines and that the plants that grow on and around it do not proliferate excessively.
Whether or not the fence you are planning to build around your commercial property needs a permit depends on several factors – here are some:
- Zoning – if your commercial facility is located in a residential area, you are likely to be required to obtain a permit for your new fence and you will probably need to comply with the neighborhood’s HOA covenants as well. Commercial zones are more relaxed in this respect;
- The height of the fence – how tall your proposed fence also determines whether it requires a permit. Many neighborhoods allow fences under a certain height to be built without having to take out a permit for it. If you need a permit, be prepared that commercial fence permits usually allow the height of 6-7 feet, a fence that is taller than that can also be authorized, but it takes lots of time and paperwork;
- The material of the fence – in most cases, the commercial fences made from concrete or masonry need a permit.
Thornton gate and fencing regulations may vary widely, depending on the city, the town or the neighborhood, so you can find out whether or not you will need a permit only if you consult the applicable regulations. If your property is surrounded by a fence that you want to dispose of, find out whether you need a demolition permit as well.
If your neighborhood has a homeowners’ association, the association’s covenant probably has very clear and precise guidelines about the style, size and material of the fences and gates in the neighborhood.
This also means that the first thing to do before you even start designing your fence, thinking about its material, style and size is to consult the document. Here are some of the aspects that you might need HOA approval for:
- Fence type – some HOA covenants do not allow to use certain materials, such as chain link or split rail, to be used on property sides facing the street because these types would disrupt the overall appearance of a neighborhood where most fences are made from masonry or wood;
- The height of the fence – this is another aspect that HOA covenants are usually very specific about. Having a fence that is too tall or too short compared to the other fences in the street or in the neighborhood also disrupts the harmonious appearance of the neighborhood.
Failing to comply with applicable HOA Westminster gate installation regulations and fencing requirements can have very serious consequences – you might be required to remove the uncomplying fence, therefore the best thing to do is to find out about the criteria that need to be observed when building a fence.
The distance between your fence posts is just as important for the proper fence design as the material or the style that you choose for your fence. Here is how to determine the most suitable fence spacing:
- The general rule – most fences use spacing of 8-12 feet between the posts, but the correct spacing depends on the type of fence, the purpose it serves, the composition of the ground and the climate conditions. Fences made from high tensile strength materials can be built leaving more distance between posts, while the fences located in harsh climate areas need posts placed closer to each other;
- Terrain and weather conditions – the quality of the soil will also determine Arvada fencing post spacing. Fencing installed into loose soil may need posts spaced more tightly to prevent exposing the fence to too much stress. Fences located in windy and stormy regions also need tighter spacing to be able to face the harsh weather;
- Fence style – the style of your fence will also influence the spacing. Designs that feature horizontally mounted components between the posts are more stable, therefore they can be built with larger spacing. There are fence designs, such as picket fences, that look better if the space between the posts is tighter.
Some materials resulting from demolished old fencing are no use at all, but others are excellent starting points for creative Westminster fencing recycling projects – while masonry or vinyl fences can only be disposed off when they are not needed any more, the wood boards that make up fences can be reused in many ways. Here are some:
- Building a new fence – be careful when you dismantle your old wood fence, paying attention not to damage the boards that are still healthy. Dispose the old, damaged boards, then clean the healthy ones, cut them to equal pieces and use them to create a new fence in which the boards are placed diagonally or in a triangle shape;
- Make a door for your shed – the process is essentially the same, but you will need a frame to insert the pieces of board into. You can create insert and use colors for a more attractive or stunning appearance;
- Build furniture – the old boards from your fence can be used for building furnishing items for your deck or for your patio. You can use them to put together a short-legged table, a bench or other forms of seating and they are great for shelves, too.
Colors are very important design components on the interior as well as on the exterior of your property, including the fence. If you are currently looking for the right color to use on your fence, here are some tips from Arvada fence company design specialists for you:
- Consider durability – transparent, colorless stain lasts for about two years, semi-transparent products last for about a year longer, while solid, pigmented stains can last for up to 5 years;
- Coordinate with the trim color on your building exterior – this is the best and easiest way to create a consistent design for your entire property;
- Consider the texture as well – if you have a solid fence, you can choose to create a pattern on the surface that matches the texture of the material used on your exterior walls. You can also choose a color that is a continuation of the wall color, not of the trim;
- Black, one of the trendiest options right now – black stain or paint is elegant, easy to maintain, it works with any building style and it is also suitable for any landscape design, for gardens with pretty flower beds as well as for landscapes with a lawn, smaller and larger shrubs and trees.